reply

1 ? have you used the ?pool pulse? to see if there is adequate flow rate?, We have but what with all the blood it is awkward to get an accurate reading.

2 ? If there isn?t enough suction, have you set the AD-Flow connecter (at the skimmer box) to a higher setting (e.g. from 1 to 3)?

I've tried this repeatedly but some of the severed fingers seem to be clogging up the flow connector. Can you suggest a remedy?

3 ? are the connections ?sealing? correctly at the skimmer box (or is suction being lost there)?

What with all the hair going in there?

4 ? Do you have a blue vacumm plate (e.g. form an earlier Kreepy Krauly)? If so, you will need to close off the spring-loaded side valve on that plate.

Hah! The kreepy Krauly is clogged up with FAT!!!

5 ? is air getting into the system - i.e. between stopping and starting, is any air visible through the clear lid of the pump, or coming back via the return? Another symptom of this is ?cycling? where the cleaner starts and stops ever few minutes.

Decomposition of the corpses is proving to allow quite a bit of methane back up. Can you send an engineer?

Posted By: Tomblander, Oct 2, 13:12:00