How Do I Resolve a Stop 0?000000D1 Error Message in IASTOR.SYS......

Here is the Dell provided Fix,

How Do I Resolve a Stop 0?000000D1 Error Message in IASTOR.SYS in the Microsoft? Windows? XP Operating System?

Table of Contents

1. Change the SATA Operation setting from RAID Autodetect / AHCI to RAID Autodetect / ATA in System Setup.
2. Download and install the Intel? Matrix Storage Driver.
3. Change the SATA Operation setting to RAID Autodetect / AHCI in System Setup.

Change the SATA Operation setting from RAID Autodetect / AHCI to RAID Autodetect / ATA in System Setup.

Date Created: 2005-08-26
Date Modified: 2005-08-26

Audience:
Internet
Extranet
Intranet

To change the SATA Operation settings in the System Setup (BIOS), perform the following steps:

Reboot the computer.
Press the key on the keyboard immediately after the keyboard LEDs flash to enter the BIOS (System Setup).
The System Setup screen appears.
Press the or keys to highlight the Drives section, and then press the key.
Press the or keys to highlight the SATA Operation section, and then press the key.
Press the or keys to highlight RAID Autodetect / ATA, and then press the key.
Press the key to exit the System Setup.
Press the or keys to highlight Save/Exit, and then press the key.
The computer restarts.

Return to Table of Contents

???????????????????????????

Download and install the Intel? Matrix Storage Driver.

Date Created: 2006-10-27
Date Modified: 2006-10-30

Audience:
Internet
Extranet
Intranet

To download and install the Intel? Matrix Storage Driver, perform the following steps:

Click User Posted Link to download the R130119.exe file to the Windows Desktop.
Double-click the R130119.EXE file on the desktop.
The Self-Extracting window appears and prompts you to extract to the C:DELLDRIVERSR130119 directory.
Write down this path so you can find the Setup.exe file later.
The Self-Extractor window appears.
Click OK.
Click the Start button, and then click Run.
Type C:DELLDRIVERSR130119 in the Open box and click OK.
Follow the on-screen installation instructions.

Return to Table of Contents

???????????????????????????

Change the SATA Operation setting to RAID Autodetect / AHCI in System Setup.

Date Created: 2004-07-19
Date Modified: 2004-08-02

Audience:
Internet
Extranet
Intranet

To change the SATA Operation settings in the System Setup (BIOS), perform the following steps:

Reboot the system.
Press the key immediately after the keyboard LEDs flash to enter the System Setup (BIOS).
Press the and keys to highlight the Drives section and press the key.
Press the and keys to highlight the SATA Operation section and press the key.
Press the and keys to highlight RAID Autodetect / AHCI and press the key.
Press to exit the System Setup (BIOS).
Press the and keys to highlight Save/Exit and press the key.

Posted By: pants, Aug 14, 14:47:54