Excellent

Here's how to reset if you need to do it in future:

Use the Default Reset button on the rear panel of the router. Use this method for cases when
the administration password or IP address is not known.
To restore the factory default configuration settings without knowing the administration password
or IP address, you must use the Default Reset button on the rear panel of the router.
1. Press and hold the Default Reset button until the test light blinks on (about 10 seconds).
2. Release the Default Reset button and wait for the router to reboot.
If the wireless router fails to restart or the power light continues to blink or turns solid amber,
the unit may be defective. If the error persists, you might have a hardware problem and should
contact technical support.

Manual is here if you need it:

User Posted Link

Posted By: the101ers on April 28th 2008 at 22:12:09


Message Thread


Reply to Message

In order to add a post to the WotB Message Board you must be a registered WotB user.

If you are not yet registered then please visit the registration page. You should ensure that their browser is setup to accept cookies.

Log in